Wilson Electronics X-1 Dokumentacja Pobierz pdf (Strona 13)

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.

Note: The Signal Booster can be reset by disconnecting and

reconnecting the power supply from the Signal Booster.

Note: All red lights must be resolved before orange lights.

The Signal Booster is equipped with 4 lights and will do one of the

following 6 things:

1. GREEN

If the indicator lights on the Signal Booster are green, the unit is

powered up and working properly.

2. ORANGE

The Signal Booster is experiencing receiver overload. If one or more

of the lights are orange, this indicates that the Signal Booster has

automatically reduced its gain due to close proximity to a cell tower.

First, turn down the gain on the band that is orange until you get a

green light. The Signal Booster is now working with reduced gain. If

the gain is not adequate for good coverage, you will need to turn the

gain to maximum and then turn the Outside Antenna away from the

cell tower until the lights turn to green. If the Signal Booster will not

respond, turn the gain down 5 dB and move the Outside Antenna.

Continue to adjust the gain and the antenna position until the light

turns green. Contact Wilson Electronics Technical Support Team for

assistance.

3. RED

If one or more lights on the Signal Booster are red, this indicates that

the Signal Booster has shut down on that frequency to prevent an

Signal Booster Lights and Troubleshooting

Signal Booster

Outdoor

Antenna

Outdoor

Antenna

Inside Panel

Antenna

Figure 1

Figure 2

CORRECT INSTALLATION

Point antennas away from each other

INCORRECT INSTALLATION

Never point antennas toward each other

Inside Panel

Antenna

Signal Booster

1 2 ... 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

Wilson Electronics X-1 Dokumentacja Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Wzmacniacze sygnału komórkowego Wilson Electronics X-1