Wilson Electronics 859994 Dokumentacja Pobierz pdf (Strona 7)

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.

Installing the Wilson Electronics In-Line

Select a location to install the In-Line that is away from excessive heat, direct

sunlight, moisture and has proper ventilation. Do not place in an air-tight enclosure.

Recommended installation locations for the In-Line are:

• On a shelf

• In a closet

• Near a power outlet

• Near the Inside Antenna

• Where there is more than 5dB loss between

In-Building Signal Booster and Inside Antenna

Note: It is important to have adequate air ventilation. Maintain at least 6 inches of

clearance from surrounding objects.

The In-Line should be placed where it can make up for installation gain loss due to

cable, taps or splitters. Optimal location is near or directly connected to the Inside

Antenna.

Note:

For distances of 20 feet or more, use Wilson low loss cable to prevent

significant signal loss or

contact Wilson Electronics Technical Support Team

for assistance: 866-294-1660.

Note: Be careful when plugging the connector in so as not to damage the center

pins on the connectors.

IMPORTANT NOTICE

• It is very important to power your Signal Booster using a surge

protected AC Power Strip with at least a 1000 Joule rating.

• Failure to do this will void your warranty in the event of a power surge

or lightning strike.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Brak uwag

Wilson Electronics 859994 Dokumentacja Strona 7